Consumer units
Board changes, second boards left behind by old extensions, and labelling that means something.
Consumer units in ChristchurchChristchurch & east Dorset
Electrical work in Christchurch and the villages around it — repairs, fuse boards, inspections, sockets, lighting and new circuits.
Services
Board changes, second boards left behind by old extensions, and labelling that means something.
Consumer units in ChristchurchWhat an inspection covers, what the codes mean, and when one is actually worth having.
Inspections in ChristchurchTripping, dead sockets or lights out — described however it comes out.
About fault findingInspections and remedial work for rented property, arranged around tenants.
Electrical work for landlordsThe full range of domestic and small commercial work. Fault finding when a breaker trips or a circuit goes dead. Sockets, switches, lighting and extractor fans. Consumer unit replacement, EICRs and landlord certificates with any repairs they call for. Additional circuits for kitchens, showers and car chargers, and rewiring in stages or in one go.
Peter carries out the work himself and prices it before starting, so there are no surprises later. Quotes are free and there is no obligation.
Christchurch sits between Bournemouth on one side and the New Forest towns on the other, and it gets treated as an extension of whichever is convenient. For electrical work it is simpler than that: if your address is Christchurch, Mudeford, Somerford, Burton or Purewell, this is the page you want, and the answer to “do you come out here?” is yes.
What makes Christchurch harder to generalise about than most towns is how much the housing varies street by street. There is Victorian and Edwardian stock near the centre, a lot of inter-war and post-war building around it, later estates, and newer infill squeezed between all of it.
So the honest answer to what your property is likely to need is that I do not know until I look. What I can say is that the age of the house is a poor guide on its own — what matters is what has been done to it since, and by whom.
There are a lot of bungalows here, and they change how the work is done rather than what it costs. With an accessible loft, most new circuits can be run from above instead of lifting floors, which is quicker and far less disruptive to live with. Where the loft has been converted or filled with insulation to the joist tops, that advantage disappears and it is worth knowing before anyone quotes.
Single-storey extensions and knocked-through kitchens are the other common job, and both are easier if I see the layout before the walls go up.
Usually a board that has had enough, extra circuits for an alteration, or a fault that needs finding. The board work has its own page — consumer units in Christchurch. For everything else, describe it in your own words and I will tell you what is involved.
Outdoor work is a steady part of the job. Weatherproof sockets, lighting along a path or drive, power for a shed or a hot tub. A garage, workshop or garden office normally needs a circuit of its own, sized for the distance and for what will actually run out there. Borrowing off the nearest indoor socket causes problems later. An EV charge point works the same way: its own circuit, with your board and incoming supply deciding what’s possible.
If you don’t know what the property needs, that’s a good reason to ring rather than a problem. Tell me what you’re thinking and I’ll explain the options. With 15 years behind me I can usually say what’s worth doing now and what can be left for later. I won’t push work you don’t need, and the quote is free. Let’s have a chat.
Coverage
Questions
Yes, and Highcliffe and out towards New Milton. If you are on the edge of that, it is still worth asking.
Often, yes. If the loft is accessible, most new circuits can be run from above rather than by lifting floors — quicker, and much easier to live with. Deep insulation or a converted loft takes that option away.
Where the sockets and lights are going, whether the cooker stays electric, and whether anything is moving on an outside wall. From that I can tell you what has to be added and whether the board copes.
No. One socket is a perfectly good reason to call. If there are several small things, list them all and they can usually be done in one visit.
Describe the job and roughly where you are, and I will come back to you.